IUOE LOCAL 158 • NEW YORK

IUOE Local 158
for Crane Operators

Where Local 158 is, how crane operators get in, what the work pays in its area, and the certification you need to run a crane as a member.

Reviewed November 2026. Office details from the IUOE's directory. CraneExamPrep.io is independent and is not affiliated with the IUOE or Local 158.

IUOE Local 158 is a mixed local, representing both hoisting and portable (construction) and stationary engineers, with its office in Glenmont, New York. Crane operators come in through the local's apprenticeship and must hold the certification OSHA requires, which members earn through OECP or CCO (NCCCO). The median crane operator in New York earns $85,850 a year.

Local 158 Offices

OfficeAddressPhone
Glenmont, New York27 Hannay Lane, Glenmont, New York 12077(518) 431-0600

Source: IUOE local union directory, checked November 2026. Local 158's own site: iuoe158.org. Confirm hours and locations with the local before you visit.

How to Become a Crane Operator With Local 158

  1. 1

    Contact the local about the apprenticeship

    Each local sets its own application dates, requirements and testing. Start with Local 158's website, or call (518) 431-0600.

  2. 2

    Apply and get accepted

    Expect an application and some form of aptitude testing or interview. How the operating engineers apprenticeship works.

  3. 3

    Train as an operating engineer

    The IUOE says apprentice training takes three to four years of paid on-the-job, field and classroom work. Apprentices usually start on smaller equipment or as oilers and work toward the crane seat.

  4. 4

    Get certified for the crane you run

    OSHA requires certification by crane type. Members can test through OECP once they have 1,000 documented crane hours, or through CCO (NCCCO). OECP certification and CCO vs OECP.

  5. 5

    Study for the written exam

    Load charts are the biggest topic on either exam. Free OECP practice test and free CCO Core practice test.

Crane Operator Pay in Local 158's Area

StateMedian hourlyMedian annualTop 10%
New York$41.27$85,850$216,500
United States$32.73$68,080$103,570

Source: BLS OEWS May 2025, SOC 53-7021, all crane and tower operators in each state, union and non-union. These are not Local 158's contract rates.

Union crane operators are paid the rate in the local's contract, plus health, pension and training contributions on top. Ask the hall for the current wage sheet. How union crane operator pay works.

Crane Certification and Licensing for Local 158 Members

Federal OSHA requires operators of most construction cranes over 2,000 pounds capacity to be certified and evaluated by their employer, union or not. The IUOE runs its own accredited program, the Operating Engineers Certification Program (OECP), open to members in good standing. Many members also hold CCO (NCCCO) cards.

State rules where Local 158 has offices: New York has its own crane operator licensing requirement. New York crane certification and license rules.

Study the Whole Exam, Not 20 Questions

5,000+ practice questions across Core and every specialty, load chart trainers with the rating table on screen, timed exam simulations, and the pass guarantee.

IUOE Local 158 FAQ

How do I join IUOE Local 158?
New operators join through the apprenticeship. Contact the local for application dates and requirements at (518) 431-0600. Experienced operators should ask the hall how it takes in journeymen.
Where is IUOE Local 158?
The IUOE's directory lists Local 158 at 27 Hannay Lane, Glenmont, New York 12077.
Does Local 158 have a crane operator apprenticeship?
Operating engineers locals train crane operators through their apprenticeship, which the IUOE says takes three to four years. Apprentices train as operating engineers and move onto cranes as they build hours.
How much do Local 158 crane operators make?
Union pay is set by Local 158's contracts, so the exact rate is on the local's wage sheet. For context, the median for all crane operators in New York, union and non-union, is $85,850 a year ($41.27 an hour) in BLS May 2025 data.
What certification do Local 158 crane operators need?
The certification OSHA requires for the crane type. IUOE members can earn it through the union's OECP program, which requires 1,000 documented crane hours, or through CCO (NCCCO).
Is Local 158 a hoisting and portable local?
The IUOE lists Local 158 as mixed: it represents hoisting and portable engineers, who run construction equipment and cranes, and stationary engineers, who run building systems.

CraneExamPrep.io is an independent exam prep site. It is not affiliated with, endorsed by or speaking for the International Union of Operating Engineers or Local 158. Contact details change; confirm them with the local.