OSHA SUBPART CC APPENDIX A • ASME B30.5

Crane Hand Signals
The Standard Chart

All 20 standard mobile crane hand signals, how each one is given, and the rules every operator and signal person is tested on.

Reviewed November 2026.

Standard crane hand signals are defined in ASME B30.5 and shown in Appendix A of OSHA Subpart CC. The core rule for telling them apart: a moving forefinger controls the load line (hoist, lower), a still thumb controls the boom. Anyone on site can give an emergency stop, and the operator must obey it.
A signal person in a hi-vis vest and hard hat standing in clear view of the crane operator, giving a standard hand signal
The signal person stays in the operator's line of sight and gives directions from the operator's point of view.

All 20 Standard Hand Signals

1

Hoist

How: forearm vertical, forefinger pointing up, hand making small horizontal circles.

HOIST raises the load on the load line. It does not move the boom.

Hoist is forefinger up, circling. Fingers talk to the load line; thumbs talk to the boom.

2

Lower

How: arm extended downward, forefinger pointing down, hand making small horizontal circles.

LOWER pays the load line out and brings the load down under control.

Lower is forefinger down, circling — the mirror of hoist.

3

Use Main Hoist

How: tap a fist on top of your head, then give the regular signals.

USE MAIN HOIST tells the operator that everything you signal from here on applies to the main load line.

Fist taps the head: use the main hoist for the signals that follow.

4

Use Whipline

How: tap your elbow with one hand, then give the regular signals.

USE WHIPLINE switches the signals that follow over to the auxiliary line — the smaller, faster one.

Tap the elbow: the auxiliary whip line takes the signals that follow.

5

Raise Boom

How: arm out horizontally, fingers closed into a fist, thumb pointing up.

RAISE BOOM brings the boom up. That shortens the radius, so the load comes up and in toward the crane.

Closed fist, thumb up is boom up. Still fingers mean the load line stays put.

6

Lower Boom

How: arm out horizontally, fingers closed into a fist, thumb pointing down.

LOWER BOOM lays the boom down, which grows the radius. Capacity drops as the boom goes out.

Closed fist, thumb down is boom down, radius out, capacity down.

7

Raise Boom & Lower Load

How: arm extended, thumb pointing up, fingers opening and closing for as long as you want the load moving.

This one does two things at once: booms up while paying the load line out, so the load holds its height while the radius shrinks.

Thumb up plus flexing fingers: the boom rises while the load pays down, keeping the load level.

8

Lower Boom & Raise Load

How: arm extended, thumb pointing down, fingers opening and closing for as long as you want the movement.

The opposite compound signal. The boom comes down while the load line hauls in, so the load stays at its height as the radius grows.

Thumb down plus flexing fingers: the boom lowers while the load line raises the load.

9

Move Slowly

How: one hand gives the motion signal while the other is held motionless in front of it.

MOVE SLOWLY is not a motion of its own. It is an overlay that modifies whatever motion signal it goes with — hoist slowly, swing slowly, whatever.

A motionless hand in front of any motion signal means do that motion slowly.

10

Swing

How: arm extended, finger pointing where you want the boom to go.

SWING rotates the upperworks and the boom to a new working position.

Point the way: the boom swings in the direction of the extended finger.

11

Stop

How: ONE arm extended to the side, palm down, swinging back and forth horizontally.

STOP halts all crane motion until you give a new signal.

One arm sweeping palm-down is stop. The same motion with two arms is the emergency stop.

12

Emergency Stop

How: BOTH arms extended to the sides, palms down, both swinging back and forth horizontally.

EMERGENCY STOP halts everything right now. And unlike every other signal in the book, anyone on site may give it.

Both arms sweeping palms-down is emergency stop, valid from anyone on site.

13

Dog Everything

How: hands clasped together in front of the body.

DOG EVERYTHING means pause. Hold every function exactly where it is until you get new signals.

Clasped hands means dog everything: freeze all motion and hold position.

14

Travel

How: arm extended forward, hand open and slightly raised, making a pushing motion in the direction of travel.

TRAVEL moves the whole machine. Not the boom, not the load line. The crane itself.

An open-hand pushing motion travels the machine in that direction.

15

Travel, Both Tracks

How: both fists in front of the body, making circular motions around each other in the direction of travel.

On a crawler, BOTH TRACKS drives the machine straight, forward or backward.

Both fists circling each other: both crawler tracks travel, forward or backward.

16

Travel, One Track

How: raise one fist and hold it still to lock the track on that side, and rotate the other fist in a vertical circle to drive the track on the other side.

ONE TRACK is how you steer a crawler. One track locks and the other drives, so the machine pivots.

Locked fist means locked track, circling fist means driving track. That is how a crawler turns.

17

Extend Boom, Two Hands

How: both fists in front of the body at the waist, thumbs pointing outward.

EXTEND BOOM telescopes the sections out, adding boom length and reach.

Both fists with thumbs out means telescope the boom out.

18

Retract Boom, Two Hands

How: both fists in front of the body, thumbs pointing toward each other.

RETRACT BOOM telescopes the sections back in, shortening the boom.

Both fists with thumbs in means telescope the boom in.

19

Extend Boom, One Hand

How: one fist in front of the chest, thumb tapping the chest.

The one-hand version exists for when your other hand is busy holding a tag line or a radio.

One fist with the thumb tapping the chest means extend the boom.

20

Retract Boom, One Hand

How: one fist in front of the chest, thumb pointing outward, with the heel of the fist tapping the chest.

The matching telescope-in command for a signal person with one hand occupied.

The heel of the fist tapping the chest with the thumb out means retract the boom.

Signal Rules on the Exam

When You Need a Signal Person

A signal person is required whenever the operator cannot clearly see the load or landing area, or the travel path is obstructed.

Who Gets to Signal

Only one person signals at a time, but anyone can give an emergency stop and the operator must obey it.

Emergency Stop From Anyone

Any person can give an emergency stop, and the operator must always obey it immediately.

Voice and Radio Signals

Voice signals must state function, direction, and distance-to-go, ending with a clear stop.

Made-Up Signals

Non-standard signals are allowed only when agreed on in advance and never conflict with standard signals.

Posting the Chart

The standard hand-signal chart must be posted on the equipment or conspicuously at the job site.

Signal Rules Worth Remembering

If a signal is unclear or communication is lost, the operator stops until it is restored.

What the Signal Person Does and Does Not Do

The signal person only signals — no rigging while signaling, no determining load weight — and every direction is given from the operator's perspective.

A signal person testing a handheld radio on site before crane operations begin
Radios are tested on site before work starts, on a dedicated channel.
A signal person standing clear of a suspended load with a view of both the load and the operator
Never under the load, always able to see the load and the landing area.

Study the Whole Exam, Not 20 Questions

5,000+ practice questions across Core and every specialty, load chart trainers with the rating table on screen, timed exam simulations, and the pass guarantee.

Crane Hand Signals FAQ

What are the standard crane hand signals?
The standard mobile crane hand signals come from ASME B30.5 and appear in Appendix A of OSHA Subpart CC. They include hoist, lower, use main hoist, use whipline, raise and lower boom, the two combined boom-and-load signals, move slowly, swing, stop, emergency stop, dog everything, travel, and the boom extend and retract signals.
Who can give a crane an emergency stop?
Anyone on the site. The operator must obey a stop signal from any person, even someone who is not the designated signal person.
What is the difference between stop and emergency stop?
Stop is one arm extended, palm down, swinging back and forth. Emergency stop is the same motion with both arms.
What does "dog everything" mean?
Pause. Hold every crane function where it is until new signals are given. It is signaled with the hands clasped in front of the body.
Does the hand signal chart have to be posted?
Yes. The standard hand signal chart must be posted on the equipment or conspicuously at the job site where signaling happens.
When is a signal person required?
Under OSHA 1926.1419, whenever the point of operation is not in full view of the operator, the operator's view is obstructed in the direction of travel, or site conditions make one necessary for safety.