NCCCO (CCO) Practical Exam
Six Tasks, In Order
The hands-on half of crane operator certification: what the proctor asks you to do, what's timed, and where candidates lose points.
Reviewed November 2026 against CCO's mobile crane practical exam outline and the CCO candidate handbook.
The Six Practical Exam Tasks
| Task | What you do | Optimum time |
|---|---|---|
| 1. Pre-operational (shift) inspection | Carry out five pre-operational inspection items for the proctor, about a minute each | None |
| 2. Place chain in stop circle | Bring the chain from the start point and set it down under control inside the circle | 1:30 |
| 3. Follow hand signals | Respond correctly to the proctor's standard hand signals | Untimed |
| 4. Place ball in barrels | Place the ball in the first barrel, then move it to the second | 3:30 (telescopic); 4:00 (lattice boom) |
| 5. Zigzag corridor with test weight | Take the test weight through the corridor and back without touching the ground or knocking a ball off a pole | 3:00 each way (swing cab, lattice boom); 4:00 each way (fixed cab) |
| 6. Safe shutdown and securing | Shut down and secure the crane before leaving the operator station | Untimed |
Sources: CCO Mobile Crane Operator practical exam outline and the CCO Mobile Crane Operator Candidate Handbook. CCO sets the course layout for each crane model, so confirm times for your crane in the current handbook.
Before the scored tasks there is a briefing and a crane walk-around, and you get unscored familiarization time: 15 minutes before the tasks begin, and up to five minutes with the test weight on the hook before the corridor.
How Optimum Times Work
- Inside the optimum time: no time penalty.
- Over the optimum time: you lose points on that task.
- At one-and-a-half times the optimum: the proctor may end the task and move on to the next.
Don't race the clock. Rushing causes the errors that cost points: a swinging load, a ball knocked off a pole, a weight that touches down.
Where Points Are Lost
- •Hook, ball or test weight touching the ground
- •Knocking a ball off a pole in the corridor
- •Chain or ball landing outside the circle or barrel
- •Responding incorrectly to a hand signal
- •Exceeding the optimum time
- •Incorrectly applying shutdown and securing procedures
The proctor records what happens and CCO scores the exam off site, so don't expect a result at the crane. A candidate disqualified for an unsafe act can't take another practical that day.
What the Practical Costs
CCO lists $70 for each mobile crane specialty practical on its fee schedule. The test site's charge for the crane, course setup and proctor is separate and varies by site. Every CCO exam fee, itemized.
How to Prepare
- Get seat time on the same crane model. Control feel differs between machines, and the course is laid out for the crane being used.
- Practice catching the swing. Every task rewards a load that stays under the boom tip.
- Know the hand signals cold. Task 3 is untimed. What counts is responding to each signal correctly. Review the standard signal chart.
- Rehearse the inspection and shutdown out loud. Tasks 1 and 6 reward a routine you can run without thinking.
- Don't let the written slide. You need Core and the specialty written too. Free NCCCO practice tests.
Study the Whole Exam, Not 20 Questions
5,000+ practice questions across Core and every specialty, load chart trainers with the rating table on screen, timed exam simulations, and the pass guarantee.