RIGGER CERTIFICATION GUIDE • 2026

Rigger Certification
Level I vs Level II

What each level covers, how the exams work, what the practical asks you to do, and what OSHA actually requires of a rigger.

Reviewed November 2026 against the CCO Rigger program and CCO fees.

CCO offers Rigger Level I (60 questions, 60 minutes) and Rigger Level II (50 questions, 60 minutes), each with a hands-on practical. Level II is only valid while Level I is current. Certification lasts five years. OSHA requires a qualified rigger for some crane work but does not require accredited certification.

Level I vs Level II

Rigger Level IRigger Level II
ScopeSimple, repetitive rigging when weight, center of gravity and configuration are givenSelects rigging by capacity and works unsupervised
Adds—Estimating weight and center of gravity, identifying and inspecting lift points, load dynamics, hoists, winches, jacks, rollers
Written exam60 questions, 60 min50 questions, 60 min
PracticalFour tasks in 60 minutes (below)Rigging a load for a level lift and for rotating a load
Fees$105 written, $95 practical$105 written, $95 practical

Sources: CCO Rigger program, nccco.org/fees.

The Level I Practical: Four Tasks

  1. Pre-use inspection. Pick slings and hardware that meet ASME and OSHA removal-from-service criteria.
  2. Rigging hitches. Demonstrate six hitches.
  3. Rigging connections. Rig and suspend a load from three task cards.
  4. Knots. Tie five: sheet bend, clove hitch, inside bowline, square knot, and two half hitches.

You get 60 minutes. Common deductions include crossed wraps under the load and more than a half twist in a sling. CCO practical exam details.

What OSHA Requires of a Rigger

OSHA's crane standard requires a qualified rigger for certain work, including crane assembly and disassembly and hooking, unhooking or guiding loads in some situations (1926.1425). A qualified rigger is someone who meets OSHA's definition of "qualified" for the rigging being done. Accredited certification is one way to show it; it is not mandatory under OSHA, though many owners and contractors require it.

A page for each level: Rigger Level I certification and Rigger Level II certification. IUOE members can also certify through the union: OECP Rigger/Signalperson.

Study the Whole Exam, Not 20 Questions

5,000+ practice questions across Core and every specialty, load chart trainers with the rating table on screen, timed exam simulations, and the pass guarantee.

Rigging Topics to Know Cold

Short explainers with practice questions on the subjects the rigger written exams lean on:

Rigger Certification FAQ

Does OSHA require rigger certification?
No. OSHA requires a qualified rigger for certain crane work, such as assembly and disassembly and hooking and unhooking loads in some situations. Qualification can be shown by a certification, but OSHA does not require one from an accredited body. Many employers and owners do.
What is the difference between Rigger Level I and Level II?
Level I riggers handle simple, repetitive rigging when the load weight, center of gravity and rigging configuration are given. Level II riggers can work those out themselves, select rigging by capacity, and work unsupervised.
How many questions are on the rigger exam?
CCO Rigger Level I has 60 questions in 60 minutes. Level II has 50 questions in 60 minutes.
How much does rigger certification cost?
CCO lists $105 for each rigger written exam and $95 for each practical exam.
How long is rigger certification good for?
Five years. Recertification is done in the 12 months before expiration, and there is no grace period.
Can I get rigger certified online?
You can prepare online and take the written exam at a test site, but the practical is done in person with real slings and hardware.