IUOE LOCAL 478 • CONNECTICUT

IUOE Local 478
for Crane Operators

Where Local 478 is, how crane operators get in, what the work pays in its area, and the certification you need to run a crane as a member.

Reviewed November 2026. Office details from the IUOE's directory. CraneExamPrep.io is independent and is not affiliated with the IUOE or Local 478.

IUOE Local 478 is a hoisting and portable local, the branch of the union that covers construction equipment and cranes, with its office in Hamden, Connecticut. Local 478 says it has 4,367 members. Crane operators come in through the local's apprenticeship and must hold the certification OSHA requires, which members earn through OECP or CCO (NCCCO). Local 478's building agreement lists $60.24 an hour for cranes of 100 tons and over and $59.20 for cranes under 100 tons, effective April 5, 2026.

Local 478 Offices

OfficeAddressPhone
Hamden, Connecticut1965 Dixwell Avenue, Hamden, Connecticut 06514(203) 288-9261

Source: IUOE local union directory, checked November 2026. Local 478's own site: local478.org. Confirm hours and locations with the local before you visit.

Local 478 says it has 4,367 members. Source: Local 478's website.

How to Become a Crane Operator With Local 478

  1. 1

    Contact the local about the apprenticeship

    Each local sets its own application dates, requirements and testing. Start with Local 478's apprenticeship page, or call (203) 288-9261.

  2. 2

    Apply and get accepted

    Expect an application and some form of aptitude testing or interview. How the operating engineers apprenticeship works.

  3. 3

    Train as an operating engineer

    The IUOE says apprentice training takes three to four years of paid on-the-job, field and classroom work. Apprentices usually start on smaller equipment or as oilers and work toward the crane seat.

  4. 4

    Get certified for the crane you run

    OSHA requires certification by crane type. Members can test through OECP once they have 1,000 documented crane hours, or through CCO (NCCCO). OECP certification and CCO vs OECP.

  5. 5

    Study for the written exam

    Load charts are the biggest topic on either exam. Free OECP practice test and free CCO Core practice test.

Local 478 Crane Operator Wage Rates

ClassificationHourly wage
Crane handling or erecting structural steel or stone$60.66
Cranes, 100 ton rated capacity and over$60.24
Cranes, under 100 ton rated capacity$59.20
Cranes 100 tons and over, from April 4, 2027$62.80

Source: Local 478 wage classification and benefit rates. Building Agreement, rates effective April 5, 2026. Wages before benefits. Rates change with each contract year, so check the current sheet.

The agreement runs to March 31, 2030, with raises each April. Rates differ between a local's agreements and areas, so treat these as one example of Local 478's scale. How union crane operator pay works.

Crane Operator Pay in Local 478's Area

StateMedian hourlyMedian annualTop 10%
Connecticut$39.12$81,360$106,980
United States$32.73$68,080$103,570

Source: BLS OEWS May 2025, SOC 53-7021, all crane and tower operators in each state, union and non-union. These are not Local 478's contract rates.

Union crane operators are paid the rate in the local's contract, plus health, pension and training contributions on top. Local 478's own rates are in the table above. How union crane operator pay works.

Crane Certification and Licensing for Local 478 Members

Federal OSHA requires operators of most construction cranes over 2,000 pounds capacity to be certified and evaluated by their employer, union or not. The IUOE runs its own accredited program, the Operating Engineers Certification Program (OECP), open to members in good standing. Many members also hold CCO (NCCCO) cards.

State rules where Local 478 has offices: Connecticut has its own crane operator licensing requirement. Connecticut crane certification and license rules.

Study the Whole Exam, Not 20 Questions

5,000+ practice questions across Core and every specialty, load chart trainers with the rating table on screen, timed exam simulations, and the pass guarantee.

IUOE Local 478 FAQ

How do I join IUOE Local 478?
New operators join through the apprenticeship. Contact the local for application dates and requirements at (203) 288-9261. Experienced operators should ask the hall how it takes in journeymen.
Where is IUOE Local 478?
The IUOE's directory lists Local 478 at 1965 Dixwell Avenue, Hamden, Connecticut 06514.
Does Local 478 have a crane operator apprenticeship?
Operating engineers locals train crane operators through their apprenticeship, which the IUOE says takes three to four years. Apprentices train as operating engineers and move onto cranes as they build hours.
How much do Local 478 crane operators make?
Local 478's building agreement lists $60.24 an hour for cranes of 100 tons and over and $59.20 for cranes under 100 tons, effective April 5, 2026. Other agreements and areas have their own rates. For context, the median for all crane operators in Connecticut, union and non-union, is $81,360 a year ($39.12 an hour) in BLS May 2025 data.
What certification do Local 478 crane operators need?
The certification OSHA requires for the crane type. IUOE members can earn it through the union's OECP program, which requires 1,000 documented crane hours, or through CCO (NCCCO).
Is Local 478 a hoisting and portable local?
Yes. The IUOE lists Local 478 as hoisting and portable, the branch that covers construction equipment and cranes.

CraneExamPrep.io is an independent exam prep site. It is not affiliated with, endorsed by or speaking for the International Union of Operating Engineers or Local 478. Contact details change; confirm them with the local.