IUOE LOCAL 98 • MASSACHUSETTS, NEW HAMPSHIRE, VERMONT

IUOE Local 98
for Crane Operators

Where Local 98 is, how crane operators get in, what the work pays in its area, and the certification you need to run a crane as a member.

Reviewed November 2026. Office details from the IUOE's directory. CraneExamPrep.io is independent and is not affiliated with the IUOE or Local 98.

IUOE Local 98 is a hoisting and portable local, the branch of the union that covers construction equipment and cranes, with offices in Southwick, Massachusetts, Hookset, New Hampshire and South Burlington, Vermont. Crane operators come in through the local's apprenticeship and must hold the certification OSHA requires, which members earn through OECP or CCO (NCCCO). Local 98's rate sheet effective June 1, 2026 lists $51.05 an hour for all cranes, $52.05 with boom over 150 feet and $53.55 over 200 feet.

Local 98 Offices

OfficeAddressPhone
Southwick, Massachusetts40 Hudson Drive, Southwick, Massachusetts 01077(413) 998-3230
Hookset, New Hampshire161 Londonderry Turnpike, Hookset, New Hampshire 03106(603) 625-5310
South Burlington, Vermont3 Gregory Drive, South Burlington, Vermont 05403(802) 863-2734

Source: IUOE local union directory, checked November 2026. Local 98's own site: iuoelocal98.org. Confirm hours and locations with the local before you visit.

How to Become a Crane Operator With Local 98

  1. 1

    Contact the local about the apprenticeship

    Each local sets its own application dates, requirements and testing. Start with Local 98's website, or call (413) 998-3230.

  2. 2

    Apply and get accepted

    Expect an application and some form of aptitude testing or interview. How the operating engineers apprenticeship works.

  3. 3

    Train as an operating engineer

    The IUOE says apprentice training takes three to four years of paid on-the-job, field and classroom work. Apprentices usually start on smaller equipment or as oilers and work toward the crane seat.

  4. 4

    Get certified for the crane you run

    OSHA requires certification by crane type. Members can test through OECP once they have 1,000 documented crane hours, or through CCO (NCCCO). OECP certification and CCO vs OECP.

  5. 5

    Study for the written exam

    Load charts are the biggest topic on either exam. Free OECP practice test and free CCO Core practice test.

Local 98 Crane Operator Wage Rates

ClassificationHourly wage
All cranes (Class 10)$51.05
Boom over 150 feet, including jib$52.05
Boom over 200 feet, including jib$53.55
Class 1 equipment$47.55

Source: IUOE Local 98 rate sheet. Rate sheet effective June 1, 2026. Wages before benefits. Rates change with each contract year, so check the current sheet.

Rates differ between a local's agreements and areas, so treat these as one example of Local 98's scale. How union crane operator pay works.

Crane Operator Pay in Local 98's Area

StateMedian hourlyMedian annualTop 10%
Massachusetts$47.19$98,150$129,790
New Hampshire$30.44$63,310$88,630
Vermont$34.98$72,760$105,910
United States$32.73$68,080$103,570

Source: BLS OEWS May 2025, SOC 53-7021, all crane and tower operators in each state, union and non-union. These are not Local 98's contract rates.

Union crane operators are paid the rate in the local's contract, plus health, pension and training contributions on top. Local 98's own rates are in the table above. How union crane operator pay works.

Crane Certification and Licensing for Local 98 Members

Federal OSHA requires operators of most construction cranes over 2,000 pounds capacity to be certified and evaluated by their employer, union or not. The IUOE runs its own accredited program, the Operating Engineers Certification Program (OECP), open to members in good standing. Many members also hold CCO (NCCCO) cards.

State rules where Local 98 has offices: Massachusetts has its own crane operator licensing requirement; New Hampshire has no state crane operator license; Vermont has no state crane operator license. Massachusetts crane certification and license rules, New Hampshire crane certification and license rules, Vermont crane certification and license rules.

Study the Whole Exam, Not 20 Questions

5,000+ practice questions across Core and every specialty, load chart trainers with the rating table on screen, timed exam simulations, and the pass guarantee.

IUOE Local 98 FAQ

How do I join IUOE Local 98?
New operators join through the apprenticeship. Contact the local for application dates and requirements at (413) 998-3230. Experienced operators should ask the hall how it takes in journeymen.
Where is IUOE Local 98?
The IUOE's directory lists Local 98 at 40 Hudson Drive, Southwick, Massachusetts 01077, with 2 more offices.
Does Local 98 have a crane operator apprenticeship?
Operating engineers locals train crane operators through their apprenticeship, which the IUOE says takes three to four years. Apprentices train as operating engineers and move onto cranes as they build hours.
How much do Local 98 crane operators make?
Local 98's rate sheet effective June 1, 2026 lists $51.05 an hour for all cranes, $52.05 with boom over 150 feet and $53.55 over 200 feet. Other agreements and areas have their own rates. For context, the median for all crane operators in Massachusetts, union and non-union, is $98,150 a year ($47.19 an hour) in BLS May 2025 data.
What certification do Local 98 crane operators need?
The certification OSHA requires for the crane type. IUOE members can earn it through the union's OECP program, which requires 1,000 documented crane hours, or through CCO (NCCCO).
Is Local 98 a hoisting and portable local?
Yes. The IUOE lists Local 98 as hoisting and portable, the branch that covers construction equipment and cranes.

CraneExamPrep.io is an independent exam prep site. It is not affiliated with, endorsed by or speaking for the International Union of Operating Engineers or Local 98. Contact details change; confirm them with the local.