CCO SIGNALPERSON • FREE PRACTICE TEST

Signalperson
Free Practice Test

The signalperson exam checks that you know the standard hand signals, can give clear voice signals, and understand how a crane moves.

Reviewed November 2026. 20 questions, answers explained, no sign-up.

The CCO Signalperson written exam has 60 questions in 60 minutes. The practical tests hand signals and voice commands. Pass both within 12 months and you are certified for five years.
CCO Signalperson
Signals
Question 1 of 20

On a 'blind lift' where the load is out of the operator's line of sight, the operator should:

  1. AUse a qualified signal person or other approved communication throughout the lift
  2. BProceed slowly using best judgment alone
  3. CLift only if the load is light
  4. DHave the load moved into view by hand first

Exam Format and Fees

ExamQuestionsTimeFee
Signalperson written6060 min$105
Signalperson practical——$95

Sources: CCO Signalperson program, nccco.org/fees.

What This Test Covers

  • ✓Standard hand signals
  • ✓Voice and radio signals
  • ✓Who may give a stop signal
  • ✓Signal person qualification (1926.1428)
  • ✓When a signal person is required (1926.1419)
  • ✓Crane dynamics and limits

Want the full picture first? Read the Signalperson certification guide.

20 Signalperson Practice Questions With Answers

Read through these at your own pace. Pick an answer, then open the explanation. The scored test above deals a different set each time.

Signals

1. On a 'blind lift' where the load is out of the operator's line of sight, the operator should:

  1. AUse a qualified signal person or other approved communication throughout the lift
  2. BProceed slowly using best judgment alone
  3. CLift only if the load is light
  4. DHave the load moved into view by hand first
Show answer

Answer: A. Use a qualified signal person or other approved communication throughout the lift. When the operator cannot see the load or landing area, a signal person/reliable communication is required.

Signals

2. Standard articulating-boom-crane hand signals are used so that:

  1. AThe operator and signal person share one clear, agreed set of signals for directing crane functions
  2. BGround workers can request breaks
  3. CThe load weight is communicated automatically
  4. DEach crew can invent its own signals
Show answer

Answer: A. The operator and signal person share one clear, agreed set of signals for directing crane functions. Standard signals provide a common language; only one designated signal person directs the operator at a time.

Signals

3. Which emergency signal must an articulating-crane operator obey no matter who gives it?

  1. AAn emergency stop signal, which is honored even from someone other than the designated signal person
  2. BA signal to speed up the lift
  3. CA signal to raise the boom higher
  4. DA signal to disengage the stabilizers
Show answer

Answer: A. An emergency stop signal, which is honored even from someone other than the designated signal person. A stop or emergency-stop signal must be obeyed from anyone; all other directing signals come only from the designated signal person.

Signals

4. The standard hand signal for EMERGENCY STOP on an articulating crane is given by:

  1. AExtending both arms out to the sides, palms down, and moving them back and forth
  2. BExtending one arm with the thumb up
  3. CTapping the top of the head with one hand
  4. DMaking a fist and holding it still overhead
Show answer

Answer: A. Extending both arms out to the sides, palms down, and moving them back and forth. Both arms extended and swept back and forth is the recognized emergency-stop signal; a single arm swept is a normal stop.

Signals

5. Only one person at a time should be designated to give directing hand signals to the operator because:

  1. AMultiple signalers can give conflicting directions and cause loss of load control
  2. BIt saves the cost of training more people
  3. CThe operator can only see one person
  4. DSignals wear out if used by several people
Show answer

Answer: A. Multiple signalers can give conflicting directions and cause loss of load control. A single designated signaler prevents conflicting commands; any person, however, may give a stop signal.

Signals

6. From whom should a crane operator accept signals?

  1. AOnly the person directing the lift or an appointed signalman, except a stop signal must be obeyed from anyone
  2. BAnyone on the floor at any time
  3. COnly the supervisor, including stop signals
  4. DNo one; the operator works independently
Show answer

Answer: A. Only the person directing the lift or an appointed signalman, except a stop signal must be obeyed from anyone. The operator responds only to the designated signal person, but must obey a stop signal at all times, no matter who gives it.

Signals

7. When two or more cranes are used to make one lift, signals must come from:

  1. AOnly one designated person
  2. BEach crane's own signalman simultaneously
  3. CWhichever rigger is closest
  4. DRadio dispatch
Show answer

Answer: A. Only one designated person. With multiple cranes on one lift, all operators must take signals from only one designated person.

Signals

8. Some organizations require voice (radio) communication rather than hand signals once the signalperson is more than what distance from the operator?

  1. A100 feet
  2. B50 feet
  3. C200 feet
  4. D300 feet
Show answer

Answer: A. 100 feet. Beyond about 100 feet hand signals become hard to read reliably, so many owners require audio communication at that distance or whenever the load is out of the operator's sight.

Signals

9. In the bell or light signal system used to control platforms and skips, what does FOUR bells or lights mean?

  1. AAll clear
  2. BStop
  3. CLower
  4. DHoist
Show answer

Answer: A. All clear. The platform/skip code runs one bell = stop, three bells = lower, and four bells = all clear. Crews must agree on the code before it is used.

Signals

10. In railway signalling, what does a blue light or flag protecting a track mean?

  1. AWorkers are on, under or between the rolling equipment; it must not be coupled or moved and no equipment may pass the blue signal
  2. BProceed at reduced speed through the work zone
  3. CThe crane may begin hoisting
  4. DStop short and await authorization
Show answer

Answer: A. Workers are on, under or between the rolling equipment; it must not be coupled or moved and no equipment may pass the blue signal. Blue signal protection is a life-safety lockout for rail workers. Moving or coupling equipment behind a blue signal can kill someone working underneath it.

Signals

11. What does a yellow light or flag indicate to an approaching train in a rail work zone?

  1. ACaution — reduce speed substantially, for example from a 40 mph limit down to 10 mph
  2. BStop immediately and do not proceed
  3. CWorkers are under the equipment ahead
  4. DThe track ahead is clear at normal speed
Show answer

Answer: A. Caution — reduce speed substantially, for example from a 40 mph limit down to 10 mph. Yellow warns of a restriction ahead so the train can be under control before it reaches the hazard or the red signal.

Signals

12. A yellow light or flag is displayed on a section of track posted at 40 mph. What must an approaching train do?

  1. AReduce speed — for a 40 mph limit that means slowing to 10 mph
  2. BStop short of the signal and wait for authorization
  3. CMaintain speed but sound the horn continuously
  4. DProceed at 40 mph unless workers are visible
Show answer

Answer: A. Reduce speed — for a 40 mph limit that means slowing to 10 mph. Yellow means reduce speed, and the reduction in the example is to a quarter of the posted limit. Crane crews working near live track need to know these signals because rail traffic controls their work window, not the other way around.

Signals

13. A blue light or flag is displayed at a rail work site. What does it mean?

  1. AWorkers are on, under or between the rolling equipment — it must not be coupled or moved, and no rolling equipment may pass the blue signal on that track
  2. BProceed slowly past the work site with the horn sounding
  3. CThe crane may begin hoisting
  4. DThe track is clear and the work is finished
Show answer

Answer: A. Workers are on, under or between the rolling equipment — it must not be coupled or moved, and no rolling equipment may pass the blue signal on that track. Blue signal protection covers inspection, testing, repair and servicing while people are in the fouling zone of the equipment. Only the crew protected by the signal may remove it.

Signals

14. If two signalpersons are directing a tower crane lift, what must always be true of them?

  1. AThey must always be in sight of each other
  2. BThey must stand at least 100 ft apart
  3. CThey must never use radios
  4. DThey must both ride the load
Show answer

Answer: A. They must always be in sight of each other. When two or more signalpeople are used, one must always be in sight of the load and they should be in sight of each other, with radio the preferred method.

Signals

15. If the two-way radio link is lost or the operator loses sight of the signalperson using hand signals, what must happen?

  1. AThe operation must stop until the operator is signaled to resume
  2. BThe operator continues at reduced speed
  3. CThe operator lands the load wherever it is
  4. DA bystander takes over signaling
Show answer

Answer: A. The operation must stop until the operator is signaled to resume. If the radio link is lost or the operator loses sight of the signalperson, the operation must stop until the operator is properly signaled to resume.

Signals

16. In standard crane hand signals, forearm vertical with the forefinger pointing up and the hand moving in a small horizontal circle means:

  1. AHoist (raise the load)
  2. BLower the load
  3. CTravel the bridge
  4. DEmergency stop
Show answer

Answer: A. Hoist (raise the load). The standard hoist signal is forearm vertical, forefinger pointing up, hand moving in a small horizontal circle; pointing down with circles means lower.

Signals

17. For a cab operated crane, a warning signal should be given

  1. ABefore starting lateral movement
  2. BWhen hoisting or lowering a load
  3. CWhen stopping movement
  4. DWhen approaching end stops
Show answer

Answer: A. Before starting lateral movement. The warning signal alerts personnel on the floor before the crane begins bridge or trolley (lateral) travel, when they could be struck by the moving crane or load.

Signals

18. When electronic voice communication between the signal person and the operator is used

  1. AA dedicated channel is required
  2. BA channel filtered for interference is required
  3. CA channel used by all personnel involved with the lift is required
  4. DA channel monitored by supervision is required
Show answer

Answer: A. A dedicated channel is required. Voice signals require a dedicated channel reserved for the lift so the operator receives directions without interference or confusion from other radio traffic.

Signals

19. Special hand signals shall be agreed upon and understood by the

  1. ASignal person and operator
  2. BSignal person and foreman
  3. CSignal person and rigger
  4. DSignal person and supervisor
Show answer

Answer: A. Signal person and operator. Special signals for situations not covered by standard signals must be agreed upon in advance by the signal person and the operator, since they are the ones communicating.

Signals

20. During the lift, the crane operator shall

  1. ARespond to signals from a designated signal person
  2. BDetermine the weight of the load
  3. CObey a stop signal only from a supervisor
  4. DTake complete control of the lift
Show answer

Answer: A. Respond to signals from a designated signal person. The operator takes movement signals only from the designated signal person (though a stop signal from anyone must be obeyed).

Study the Whole Exam, Not 20 Questions

5,000+ practice questions across Core and every specialty, load chart trainers with the rating table on screen, timed exam simulations, and the pass guarantee.

Signalperson Exam FAQ

How many questions are on the signalperson exam?
60 multiple-choice questions in 60 minutes.
What is on the signalperson practical?
You demonstrate both hand signals and voice commands, and show you understand basic crane dynamics and operation.
Who can give an emergency stop?
Anyone on the site. The operator must obey a stop signal from any person.
How long does signalperson certification last?
Five years. Recertification is done in the 12 months before it expires, and there is no grace period.