CRANE MANUFACTURERS • TEREX

Terex Crane Certification
Which Card You Need

There is no Terex-specific certification. What you need depends on the type of Terex crane you run.

Reviewed November 2026 against CCO's certification codes, program list and OSHA 29 CFR 1926.1427.

Terex is known for rough terrain cranes and tower cranes. Crane operator certification is by crane type, not brand, so the card you need to run a Terex depends on the machine: Telescopic Boom Swing Cab (TLL) for rough terrain cranes; Tower Crane Operator (TWR) for tower cranes. On top of the card, OSHA requires your employer to evaluate you on the specific make and model.
NCCCO TLL
Swing Cab — General
Question 1 of 20

The TLL's 76-degree maximum boom angle applies when the crane is…

  1. ALifting on tires
  2. BLifting on fully extended outriggers
  3. CLifting with the fly erected
  4. DOperating in any configuration

Terex Cranes and the Certification for Each

Certification mapping from CCO certification codes. Product ranges change, so check the manufacturer for current models.

Why There Is No Terex Certification

CCO, OECP and the other accredited certifiers test you on a type of crane, and the card applies to any brand of that type. A swing cab card earned on one manufacturer's crane is valid on another's.

What is brand-specific is your employer's evaluation. OSHA requires it before you operate, on equipment of the type and configuration you will run, and the record has to show the make, model and configuration. Controls, computers and operator aids differ a great deal between manufacturers, so expect to be evaluated again when you move to a different machine.

Reading a Terex Load Chart

Every manufacturer lays its charts out differently: where the notes sit, how deductions are listed, how work areas and outrigger positions are shown. The method does not change. Identify the configuration, find the radius, read gross capacity, subtract every deduction, and compare net capacity with the load.

On the CCO written exam the load charts are supplied with the test, so what you are practicing is the method. On the job, the only chart that counts is the one for that exact Terex model and configuration. Load chart trainer.

Do You Need a Crane License?

A CCO or OECP card is what most people mean by a crane license, but it is a national certification. Sixteen states and seven cities also issue a government crane license. Where a crane license is required and crane certification rules by state.

Whatever the card says, OSHA also requires your employer to evaluate you on the Terex crane you will actually run, and to document the make, model and configuration.

Study the Whole Exam, Not 20 Questions

5,000+ practice questions across Core and every specialty, load chart trainers with the rating table on screen, timed exam simulations, and the pass guarantee.

Terex Crane Certification FAQ

What certification do I need to operate a Terex crane?
It depends on the crane type: Telescopic Boom Swing Cab (TLL) for rough terrain cranes; Tower Crane Operator (TWR) for tower cranes.
Is there a Terex crane operator certification?
No. Accredited certification is by crane type, not manufacturer. Some manufacturers and dealers offer product training, which is useful but is not the operator certification OSHA requires.
Does my certification cover other brands?
Yes, for the same crane type. Your employer must still evaluate you on each make and model you operate.
Do I need a crane license to run a Terex?
Federal OSHA requires certification for construction cranes over 2,000 pounds capacity. Sixteen states and seven cities also require a government license. Crane license requirements.

CraneExamPrep.io is not affiliated with Terex. Manufacturer names are trademarks of their owners and are used here only to identify equipment.