CRANE TYPES • TOWER CRANE

Tower Crane
Certification & License

What tower cranes are, and which crane certification covers them.

Reviewed November 2026 against CCO's certification codes, program list and OSHA 29 CFR 1926.1427.

To operate tower cranes on a construction site you need the CCO (NCCCO) Tower Crane Operator (TWR) certification, or the OECP Tower Crane certification if you are an IUOE member. Certification means a written exam and a hands-on practical, and your employer must also evaluate you on the machine.
CCO Tower
Tower Crane
Question 1 of 20

What best describes a tower crane saddle jib?

  1. AA horizontal or slightly angled jib supported by pendant lines with a movable trolley carrying the hoist
  2. BA jib that raises and lowers to change radius with no trolley
  3. CA jib pivoted behind the tower with a fixed trolley
  4. DA telescoping jib supported by hydraulic cylinders

What Is a Tower Crane?

A tower crane is a fixed crane with a jib mounted on a vertical mast, used to build tall structures. The main kinds are hammerhead (saddle jib), luffing jib and self-erecting.

  • ✓Hammerhead cranes move the load with a trolley along a horizontal jib
  • ✓Luffing jib cranes raise and lower the jib, for tight sites
  • ✓Self-erecting cranes fold out without a second crane
  • ✓Wind limits and out-of-service weathervaning are central to operation

Certification Needed for a Tower Crane

CertifierCertificationWho it is for
CCO (NCCCO)Tower Crane Operator (TWR)Anyone 18 or older
OECPOECP Tower CraneIUOE members with 1,000 documented crane hours

Sources: CCO certification codes, CCO programs.

OSHA requires certification for tower cranes over 2,000 pounds capacity used in construction. How the rule works.

Do You Need a Crane License?

A CCO or OECP card is what most people mean by a crane license, but it is a national certification. Sixteen states and seven cities also issue a government crane license. Where a crane license is required and crane certification rules by state.

Whatever the card says, OSHA also requires your employer to evaluate you on the tower crane you will actually run, and to document the make, model and configuration.

How to Get Certified

  1. 1
  2. 2

    Pass the written exam

    Free practice test and the study guide.

  3. 3

    Pass the practical exam

    On a tower crane or a crane of the same designation. Exam details and fees.

  4. 4

    Get evaluated by your employer

    On the specific make, model and configuration you will run.

Tower Crane Manufacturers

Study the Whole Exam, Not 20 Questions

5,000+ practice questions across Core and every specialty, load chart trainers with the rating table on screen, timed exam simulations, and the pass guarantee.

Tower Crane FAQ

What certification do I need to operate a tower crane?
Through CCO (NCCCO), Tower Crane Operator (TWR). IUOE members can certify through OECP Tower Crane instead.
Do I need a license to run a tower crane?
Federal OSHA requires certification rather than a license for construction work. Sixteen states and seven cities add a government license. Crane license requirements.
How do I get tower crane training?
Through a union apprenticeship, a crane school or your employer. Training routes compared.
What is a tower crane?
A tower crane is a fixed crane with a jib mounted on a vertical mast, used to build tall structures. The main kinds are hammerhead (saddle jib), luffing jib and self-erecting.