Choker Hitch
Capacity & Angle of Choke
A choker hitch tightens on the load as it lifts. That grip costs capacity.
Reviewed November 2026 against OSHA 29 CFR 1910.184.
Angle of Choke
The angle of choke is the angle at the choke point between the vertical part of the sling and the part wrapping the load. Pulling the choke down tight makes that angle smaller and cuts capacity.
| Angle of choke | Share of the choker rating |
|---|---|
| Over 120° | 100% |
| 90° to 120° | 87% |
| 60° to 89° | 74% |
| 30° to 59° | 62% |
| 0° to 29° | 49% |
ASME B30.9 table for wire rope, synthetic rope, webbing and roundslings. These percentages apply to the choker rating, which is already lower than the vertical rating.
Rules for Choking a Load
- ✓Choke on the sling body. The choke point must never bear on a splice, fitting, weld or tag
- ✓Do not beat the choke down. Let it seat naturally. Forcing it tight shrinks the angle of choke
- ✓Use the tag's choker rating if it has one. The default percentages are for when it does not
- ✓One choker does not hold a load level. Use two, spaced apart, on long loads
- ✓Double wrap choker for loose bundles and smooth loads. The extra wrap grips all the way around
- ✓Protect the sling at corners, and face the choke so it tightens in the direction that keeps the load from rolling
Worked Example
A wire rope sling is rated 10,000 lb vertical. Its tag does not list a choker rating, so the default is 75 percent: 7,500 lb.
The rigger pulls the choke down to about 70 degrees. From the table that is 74 percent of the choker rating: 7,500 × 0.74 = 5,550 lb.
Same sling, same load, and nearly half the vertical capacity is gone.
5 Practice Questions: Choker hitch
From the question bank in the app. Pick an answer, then open the explanation. For a scored test, try the rigger practice test.
ASME B30.9 (Slings)
1. When the choker rating is not marked on a synthetic webbing sling, the choker rating shall be what percentage of the straight-line rating?
- A80%
- B75%
- C100%
- D70%
Show answer
Answer: A. 80%. Para. 9-5.10.1(d): webbing sling choker rating defaults to 80% of the straight-line hitch rating; synthetic rope slings default to 75%.
ASME B30.9 (Slings)
2. In a choker hitch, where should the choke point be located per ASME B30.9?
- AOnly on the sling body, never on a fitting or splice
- BOn the swaged fitting for durability
- CAt the master link
- DOn the hook throat
Show answer
Answer: A. Only on the sling body, never on a fitting or splice. Operating practices for every sling type require the choke point to bear only on the sling body — not on a fitting, splice, weld, or braze.
ASME B30.9 (Slings)
3. When the choker rating is not identified on a strand-laid wire rope sling, what default choker rating applies?
- A75% of the straight-line hitch rating
- B80% of the straight-line hitch rating
- C100% of the straight-line hitch rating
- D70% of the straight-line hitch rating
Show answer
Answer: A. 75% of the straight-line hitch rating. Para. 9-2.10.1(d): choker rating defaults to 75% of vertical for single-leg and bridle wire rope slings, and 70% for cable-laid slings.
ASME B30.9 (Slings)
4. A wire rope choker hitch is drawn down to an angle of choke of 25 deg. What percent of the choker rated capacity remains?
- A49%
- B62%
- C74%
- D87%
Show answer
Answer: A. 49%. Angles of choke from 0-29 deg reduce rated capacity to 49% per Table 9-2.10.1-1.
ASME B30.9 (Slings)
5. Per the angle-of-choke tables for wire rope, synthetic rope, webbing, and roundslings, a choke angle of 60-89 deg yields what percentage of the choker rated capacity?
- A74%
- B87%
- C62%
- D49%
Show answer
Answer: A. 74%. The tables give: over 120 deg = 100%, 90-120 = 87%, 60-89 = 74%, 30-59 = 62%, 0-29 = 49% of choker rated capacity.
Study the Whole Exam, Not 20 Questions
5,000+ practice questions across Core and every specialty, load chart trainers with the rating table on screen, timed exam simulations, and the pass guarantee.
Choker hitch: Questions & Answers
What is a choker hitch?
How much capacity does a choker hitch lose?
What is the angle of choke?
Where should the choke point be?
Is a choker hitch better than a basket hitch?
This page is a study aid. It summarizes federal OSHA rules and industry standards and is not a substitute for the regulation, the manufacturer's manual or your employer's procedures. State plans and site rules can be stricter.