INSPECTIONS & STANDARDS • CRANE EXAM TOPIC

ASME B30.5
The Mobile Crane Standard, Explained

ASME B30.5 is the industry safety standard for mobile cranes: how they are built, inspected, maintained and operated.

Reviewed November 2026 against ASME B30.5-2025 scope, 29 CFR 1926.1433.

ASME B30.5 is the safety standard for mobile and locomotive cranes: crawler cranes, locomotive cranes and wheel-mounted cranes. It covers construction, inspection, testing, maintenance and operation. The current edition is B30.5-2025. It is a voluntary consensus standard, but OSHA incorporates parts of it by reference, and those parts are enforceable.

What B30.5 Covers

ChapterSubject
5-0Scope, definitions, personnel competence and references
5-1Construction and characteristics: load ratings, stability, boom and load hoists, controls, ropes and reeving, cabs
5-2Inspection, testing and maintenance
5-3Operation: operator qualifications, responsibilities, handling the load, signals, working near power lines

Cranes with a maximum rated capacity of one ton or less are outside the scope. Source: ASME B30.5-2025.

B30.5 and OSHA

OSHA's construction crane rule is 29 CFR 1926 Subpart CC. B30.5 is written by an industry committee, not a government agency, so on its own it is not law.

Where OSHA incorporates a section by reference, that section carries the same force as the regulation. Section 1926.1433, for example, requires mobile cranes manufactured on or after November 8, 2010 to meet listed design sections of B30.5-2004.

B30.5 also assigns responsibilities on the job: crane owner, crane user, site supervisor, lift director and crane operator. One person can hold more than one role, but every role has to be assigned.

The Other B30 Volumes Operators Run Into

VolumeCovers
B30.5Mobile and locomotive cranes
B30.9Slings
B30.10Hooks
B30.20Below-the-hook lifting devices
B30.26Rigging hardware: shackles, eyebolts, turnbuckles, links, rigging blocks
B30.23Personnel lifting systems
B30.3Tower cranes
B30.2Overhead and gantry cranes
B30.22Articulating boom cranes

See also ASME B30.9 slings and below-the-hook lifting devices.

5 Practice Questions: ASME B30.5

From the question bank in the app. Pick an answer, then open the explanation. For a scored test, try the NCCCO core practice test.

Standards

1. ASME B30.5 is the safety standard covering:

  1. AMobile and locomotive cranes
  2. BSlings
  3. CBelow-the-hook lifting devices
  4. DRigging hardware such as shackles and turnbuckles
Show answer

Answer: A. Mobile and locomotive cranes. B30.5 addresses mobile and locomotive cranes. Slings are B30.9, rigging hardware is B30.26, and below-the-hook lifting devices are B30.20.

Standards

2. Which is NOT within the scope of ASME B30.5?

  1. AOverhead and gantry cranes
  2. BTruck-mounted cranes
  3. CCrawler cranes
  4. DLocomotive cranes
Show answer

Answer: A. Overhead and gantry cranes. B30.5 covers mobile and locomotive cranes; overhead and gantry cranes fall under B30.2. Trap: EXCEPT-style wording — choose the odd one out.

ASME B30.5 (Mobile Cranes)

3. According to ASME B30.5, cranes with what maximum rated capacity are excluded from the scope of the standard?

  1. A1 ton or less
  2. B5 tons or less
  3. C3 tons or less
  4. D1/2 ton or less
Show answer

Answer: A. 1 ton or less. Section 5-0.1 excludes cranes having a maximum rated capacity of 1 ton or less, along with side boom tractors, digger derricks, knuckle boom and trolley boom cranes.

Definitions

4. When OSHA incorporates a standard like ASME B30.5 by reference, what is the effect?

  1. AIts mandatory provisions carry the same force and effect as OSHA's own regulations
  2. BIt becomes a voluntary best practice only
  3. CIt applies only when the manufacturer requires it
  4. DIt replaces the entire OSHA standard
Show answer

Answer: A. Its mandatory provisions carry the same force and effect as OSHA's own regulations. Incorporation by reference gives the mandatory provisions of the adopted standard the same legal force as other OSHA regulations.

Technical Knowledge

5. Under ASME B30.5 worksite organization, can one individual fill more than one role?

  1. AYes — a single person may perform one or more of the roles
  2. BNo — each role must be a separate person
  3. COnly with written OSHA approval
  4. DOnly on lifts below 50% of capacity
Show answer

Answer: A. Yes — a single person may perform one or more of the roles. B30.5 requires all roles be assigned, but a single individual may perform one or more of them.

Study the Whole Exam, Not 20 Questions

5,000+ practice questions across Core and every specialty, load chart trainers with the rating table on screen, timed exam simulations, and the pass guarantee.

ASME B30.5: Questions & Answers

Is ASME B30.5 a law?
No. It is a voluntary consensus standard. The parts OSHA incorporates by reference are enforceable, and contracts and site rules often require the whole standard.
What is the latest edition of ASME B30.5?
B30.5-2025, published at the end of December 2025 as a revision of B30.5-2021.
What cranes does ASME B30.5 apply to?
Crawler cranes, locomotive cranes and wheel-mounted cranes, both truck and self-propelled. Cranes rated one ton or less are excluded.
Is ASME B30.5 on the NCCCO exam?
Yes. CCO lists ASME B30.5 and OSHA 29 CFR 1926 Subpart CC among the reference materials for its mobile crane operator written exams, so expect questions drawn from both.
Is ANSI B30.5 the same thing?
Yes. Older documents and some regulations call it ANSI B30.5. It is now published as ASME B30.5.

This page is a study aid. It summarizes federal OSHA rules and industry standards and is not a substitute for the regulation, the manufacturer's manual or your employer's procedures. State plans and site rules can be stricter.