Qualified Rigger
What OSHA Means and When You Need One
What OSHA means by a qualified rigger, when one is required, and how that differs from a certified rigger.
Reviewed November 2026 against 29 CFR 1926.1401, 1926.1404(r), 1926.1425(c).
When OSHA Requires a Qualified Rigger
| Situation | Rule |
|---|---|
| Rigging work during crane assembly and disassembly | 1926.1404(r)(1) |
| Workers in the fall zone hooking, unhooking or guiding the load, or making the initial connection of a load to a component or structure | 1926.1425(c)(3) |
Definition: 29 CFR 1926.1401. Fall zone rule: 1926.1425.
Qualified for the Job in Front of You
The employer decides who is a qualified rigger. OSHA does not require a third-party certification for it.
Being qualified is tied to the work. A rigger with years of experience on structural steel may be qualified for those picks and not for an unusual, unbalanced load they have never handled. The test is whether the person can rig that load properly.
Qualified Rigger vs Certified Rigger
| Qualified rigger | Certified rigger | |
|---|---|---|
| Who says so | The employer | An accredited certifier, after written and practical exams |
| Required by federal OSHA | Yes, in the two situations above | No |
| Portable to the next employer | No. Each employer makes its own determination | Yes |
| Often required by | OSHA | Project owners, general contractors, and some states and cities |
CCO offers Rigger Level I and Level II certification. See our rigger certification guide.
3 Practice Questions: Qualified rigger
From the question bank in the app. Pick an answer, then open the explanation. For a scored test, try the rigger practice test.
Lift Director — Core
1. Which best describes a 'qualified rigger' as required by OSHA when employees are in the fall zone during hooking, unhooking, guiding, or connecting a load?
- AA person who, by degree, certificate, professional standing, or extensive knowledge, training, and experience, can successfully solve problems relating to the rigging of loads
- BAny laborer assigned to attach slings that day
- CA person who holds a current crane operator certification
- DAny employee wearing a high-visibility vest
Show answer
Answer: A. A person who, by degree, certificate, professional standing, or extensive knowledge, training, and experience, can successfully solve problems relating to the rigging of loads. OSHA 1926.1401/1926.1425 require a qualified rigger—one whose recognized degree, certificate, or extensive experience lets them solve rigging problems—when workers are in the fall zone during rigging tasks.
Rigging
2. When employees in the fall zone are hooking, unhooking, or guiding a load, who must have rigged the materials?
- AA qualified rigger
- BAny competent person
- CThe crane operator
- DThe lift director personally
Show answer
Answer: A. A qualified rigger. When employees are engaged in hooking, unhooking, or guiding a load within the fall zone, the materials must be rigged by a qualified rigger and rigged to prevent unintentional displacement.
Rigging
3. During crane assembly, rigging work must be done by…
- AA qualified rigger
- BThe operator
- CThe safety manager
- DAny crew member
Show answer
Answer: A. A qualified rigger. OSHA requires a qualified rigger for rigging during assembly and disassembly.
Study the Whole Exam, Not 20 Questions
5,000+ practice questions across Core and every specialty, load chart trainers with the rating table on screen, timed exam simulations, and the pass guarantee.
Qualified rigger: Questions & Answers
What is a qualified rigger?
Does a qualified rigger need to be certified?
When is a qualified rigger required?
Who determines if a rigger is qualified?
Is a qualified rigger the same as a signal person?
This page is a study aid. It summarizes federal OSHA rules and industry standards and is not a substitute for the regulation, the manufacturer's manual or your employer's procedures. State plans and site rules can be stricter.