Who Should Inspect a Crane?
The Person OSHA Names for Each Inspection
OSHA names a specific kind of person for every crane inspection, and the written exams ask which is which.
Reviewed November 2026 against 29 CFR 1926.1412, 1926.1413, 1926.1401.
Who Does Each Crane Inspection
| Inspection | Who | When | Record OSHA requires |
|---|---|---|---|
| Each shift (pre-shift) | Competent person | Started before the shift, finished before or during it | None |
| Monthly | Competent person | Every month the crane is in service | Items checked, results, name, signature and date. Kept 3 months |
| Annual / comprehensive | Qualified person | At least every 12 months | Kept 12 months |
| Post-assembly | Qualified person | When assembly is finished, before use | Not specified |
| After a safety-related repair or adjustment | Qualified person | Before the crane is used again | Not specified |
| After a modification or addition | Qualified person | Before the crane is used again | Not specified |
| Severe service (overload, shock load, corrosive exposure) | Qualified person | Use stops until the inspection is done | Not specified |
| Idle 3 months or more | Qualified person | Before the crane goes back to work | Same as monthly |
| Wire rope, each shift | Competent person | Before or during each shift | None |
Source: 29 CFR 1926.1412 and 1926.1413. These are the rules for cranes used in construction.
Competent Person vs Qualified Person
A competent person can spot existing and predictable hazards and has the authority to correct them right away. Often that is the operator, as long as the operator meets both halves of the definition.
A qualified person has a recognized degree, certificate or professional standing, or extensive knowledge, training and experience, and has shown they can solve problems in that subject. The annual inspection needs that deeper knowledge because it can call for taking components apart.
Full comparison: competent person vs qualified person.
What Happens When the Inspection Finds Something
On a shift inspection, the competent person decides on the spot whether the deficiency is a safety hazard. If it is, the crane comes out of service until it is corrected. If a safety device is not working, the crane does not run until it is fixed.
The shift inspection is visual. OSHA says taking components apart and booming down are not required unless what the inspector sees calls for a closer look.
5 Practice Questions: Who inspects a crane
From the question bank in the app. Pick an answer, then open the explanation. For a scored test, try the NCCCO core practice test.
General Knowledge
1. According to OSHA 1926.1412, who is responsible for conducting the inspections prior to or during each shift?
- Acompetent person
- Bdesignated person
- Cassigned person
- Dqualified person
Show answer
Answer: A. competent person. OSHA 1926.1412 requires a competent person to conduct shift inspections.
Inspections
2. The pre-shift visual inspection must be performed by a…
- ACompetent person
- BQualified engineer
- CDesignated manager
- DCertified rigger
Show answer
Answer: A. Competent person. OSHA assigns shift visual inspections to a competent person.
Inspections
3. The annual/comprehensive crane inspection must be performed by which person?
- AA qualified person
- BA competent person
- CAn appointed person
- DA designated signal person
Show answer
Answer: A. A qualified person. Each-shift and monthly inspections require a competent person, but the annual/comprehensive inspection must be done by a qualified person.
Inspections
4. Under OSHA 1926.1412, the monthly visual crane inspection must be performed by a…
- ACompetent person
- BQualified person
- CCertified operator only
- DRegistered professional engineer
Show answer
Answer: A. Competent person. Shift and monthly visual inspections require a competent person; the annual inspection requires a qualified person.
Wire Rope
5. Each-shift visual wire rope inspections are the responsibility of a:
- ACompetent person
- BQualified engineer only
- CThe equipment manufacturer
- DAny available laborer
Show answer
Answer: A. Competent person. OSHA assigns the each-shift wire rope inspection to a competent person who can identify existing and predictable hazards.
Study the Whole Exam, Not 20 Questions
5,000+ practice questions across Core and every specialty, load chart trainers with the rating table on screen, timed exam simulations, and the pass guarantee.
Who inspects a crane: Questions & Answers
Who should do the pre-shift inspection of a crane?
Can the crane operator do the daily inspection?
Who does the annual crane inspection?
Does OSHA require a third-party crane inspector?
Is it the same for overhead cranes in a shop?
This page is a study aid. It summarizes federal OSHA rules and industry standards and is not a substitute for the regulation, the manufacturer's manual or your employer's procedures. State plans and site rules can be stricter.