CCO OVERHEAD • FREE PRACTICE TEST

Overhead Crane Operator
Free Practice Test

Overhead and gantry cranes run on rails inside plants and yards. Questions draw on ASME B30.2, below-the-hook lifting devices (B30.20) and daily inspection.

Reviewed November 2026. 20 questions, answers explained, no sign-up.

Overhead crane operation is governed by OSHA 1910.179 and ASME B30.2. OSHA requires that only designated people operate the crane; many employers use the CCO Overhead Crane Operator certification to show it. CCO lists $210 for the written exam and $70 for the practical.
CCO Overhead
Overhead Crane
Question 1 of 20

Under OSHA regulations for overhead and gantry cranes, what are the two general inspection classifications and their intervals?

  1. AFrequent (daily to monthly) and Periodic (1 to 12 month intervals)
  2. BFrequent (hourly to daily) and Periodic (monthly)
  3. CMinor (weekly) and Major (5 years)
  4. DVisual (monthly) and Thorough (annual)

What This Test Covers

  • ✓Bridge, trolley and hoist controls
  • ✓ASME B30.2 operating practices
  • ✓Below-the-hook devices (B30.20)
  • ✓Frequent and periodic inspection
  • ✓Pendant and cab operation
  • ✓Load handling in plants

Want the full picture first? Read the overhead crane operator certification guide.

20 Overhead Crane Practice Questions With Answers

Read through these at your own pace. Pick an answer, then open the explanation. The scored test above deals a different set each time.

Overhead Crane

1. Under OSHA regulations for overhead and gantry cranes, what are the two general inspection classifications and their intervals?

  1. AFrequent (daily to monthly) and Periodic (1 to 12 month intervals)
  2. BFrequent (hourly to daily) and Periodic (monthly)
  3. CMinor (weekly) and Major (5 years)
  4. DVisual (monthly) and Thorough (annual)
Show answer

Answer: A. Frequent (daily to monthly) and Periodic (1 to 12 month intervals). Inspections are classified as frequent (daily to monthly intervals) and periodic (1 to 12 month intervals).

ASME B30.2 Standard

2. According to ASME B30.2, which crane types are within the scope of the volume?

  1. ATop-running bridge, single or multiple girder cranes with top-running trolley hoists
  2. BUnderhung cranes and monorails
  3. CMobile and locomotive cranes
  4. DTower cranes and derricks
Show answer

Answer: A. Top-running bridge, single or multiple girder cranes with top-running trolley hoists. B30.2 covers top-running bridge, single or multiple girder cranes with top-running trolley hoists, including cantilever gantry, semigantry, and wall cranes; underhung cranes fall under B30.17.

Below the Hook (B30.20)

3. Under ASME B30.20, what is a below-the-hook lifting device?

  1. AA device used for attaching a load to a hoist
  2. BAny hook attached directly to a crane's load block
  3. CA sling assembly made of wire rope or chain
  4. DThe hoisting machinery unit used for lifting and lowering
Show answer

Answer: A. A device used for attaching a load to a hoist. B30.20 defines a below-the-hook lifting device (lifter) as a device used for attaching a load to a hoist; it may contain slings, hooks, and rigging hardware covered by other B30 volumes.

Overhead Crane

4. What is the proper purpose of the hoist upper limit switch?

  1. AIt is an emergency device to prevent the block from contacting the hoist drum, not an operating control
  2. BIt is the normal means of stopping the hoist each cycle
  3. CIt measures load weight
  4. DIt controls hoisting speed
Show answer

Answer: A. It is an emergency device to prevent the block from contacting the hoist drum, not an operating control. The upper limit switch exists to prevent the block from contacting the drum; operators must use the controller, not the limit switch, to stop the hoist.

ASME B30.2 Standard

5. According to ASME B30.2, where shall the rated load of the crane be marked?

  1. AOn each side of the crane, legible from the ground or floor
  2. BOnly in the operator's cab
  3. COn the runway structure at each end
  4. DOn the main disconnect switch
Show answer

Answer: A. On each side of the crane, legible from the ground or floor. The crane's rated load shall be marked on each side of the crane and be legible from the ground or floor.

Below the Hook (B30.20)

6. Which condition-related item shall operator instruction cover regarding the load itself?

  1. ACondition of the load required for operation of the lifter, such as balance, surface cleanliness, flatness, bending, and load thickness
  2. BThe market value of the load
  3. CThe paint color of the load
  4. DThe date the load was manufactured
Show answer

Answer: A. Condition of the load required for operation of the lifter, such as balance, surface cleanliness, flatness, bending, and load thickness. Operator instruction includes the condition of the load required for operation of the lifter, such as but not limited to balance, surface cleanliness, flatness, bending, and load thickness, along with application of the lifter, special precautions, manufacturer's procedures, and storage of the lifter.

Overhead Crane

7. At the end of operation, the crane safety rules require the operator to:

  1. AReturn the hoisting device to its designated park position and open the main circuit breaker
  2. BLeave the crane wherever the last lift ended with power on
  3. CLower the block to the floor and leave the breaker closed
  4. DRemove the pendant and take it home
Show answer

Answer: A. Return the hoisting device to its designated park position and open the main circuit breaker. The final rule is to return the hoisting device to its designated park position and open the main circuit breaker.

ASME B30.2 Standard

8. According to ASME B30.2, when may a crane be used to lift loads with side pull?

  1. AOnly when specifically authorized by a qualified person who has determined the crane parts will not be overstressed, the rope will not rub against other crane members, and the rope will not be pulled out of the sheave or across drum grooves
  2. BWhenever the load is less than 50% of rated capacity
  3. CWhen the operator judges it safe
  4. DNever, under any circumstances
Show answer

Answer: A. Only when specifically authorized by a qualified person who has determined the crane parts will not be overstressed, the rope will not rub against other crane members, and the rope will not be pulled out of the sheave or across drum grooves. The crane shall be used to lift loads vertically without side pull except when specifically authorized by a qualified person who has determined that crane parts will not be overstressed, the hoist rope will not bear or rub against other members, and side pulls will not pull the rope out of the sheave or across drum grooves.

Below the Hook (B30.20)

9. How does ASME B30.20 define severe service?

  1. ANormal or heavy service combined with abnormal operating conditions
  2. BAny service above 85% of rated load
  3. CService involving more than two shifts per day
  4. DService performed without a qualified person present
Show answer

Answer: A. Normal or heavy service combined with abnormal operating conditions. Severe service is normal or heavy service with abnormal operating conditions such as temperature extremes, corrosive fumes, or dust-laden atmospheres.

Overhead Crane

10. A mechanical load brake controls load speed in which direction?

  1. ALowering only
  2. BHoisting only
  3. CBoth hoisting and lowering equally
  4. DBridge travel
Show answer

Answer: A. Lowering only. The mechanical load brake is a friction device, usually multi-disc, that controls load speed in the lowering direction only and prevents the load from overhauling the motor.

ASME B30.2 Standard

11. According to ASME B30.2, when operating with a remote control, the operator shall be positioned how?

  1. ASo the path of travel of the crane, load, and obstructions can be seen (unless a signalperson is utilized), and so as not to be contacted by a swinging or moving load
  2. BDirectly beneath the load at all times
  3. CWithin 10 ft of the load block
  4. DIn the crane cab
Show answer

Answer: A. So the path of travel of the crane, load, and obstructions can be seen (unless a signalperson is utilized), and so as not to be contacted by a swinging or moving load. Remote-control operators shall be positioned so the path of travel of the crane, load, and obstructions can be seen unless a signalperson is used, and positioned so as not to be contacted by a swinging or moving load.

Below the Hook (B30.20)

12. How does ASME B30.20 define a qualified person?

  1. AA person who, by recognized degree or certificate of professional standing, or by extensive knowledge, training, and experience, has demonstrated the ability to solve or resolve problems relating to the subject matter and work
  2. BAny employee designated by the supervisor to operate the lifter
  3. CA person with at least 10 years of crane experience
  4. DAn engineer licensed in the state where the lifter is used
Show answer

Answer: A. A person who, by recognized degree or certificate of professional standing, or by extensive knowledge, training, and experience, has demonstrated the ability to solve or resolve problems relating to the subject matter and work. A qualified person possesses a recognized degree or certificate of professional standing, or extensive knowledge, training, and experience, and has successfully demonstrated the ability to solve problems relating to the subject matter and work.

Overhead Crane

13. What does "plugging" a crane motor mean?

  1. AReversing motor line polarity or phase sequence before rotation stops, creating a retarding counter torque
  2. BConnecting the crane to runway power
  3. CLocking the controller in the OFF position
  4. DRunning the motor at locked-rotor torque
Show answer

Answer: A. Reversing motor line polarity or phase sequence before rotation stops, creating a retarding counter torque. To plug is to operate the controller so the motor voltage polarity or phase sequence is reversed before rotation stops, developing a counter torque that acts as a retarding force.

ASME B30.2 Standard

14. According to ASME B30.2, from whose perspective shall all directions be given to the crane operator?

  1. AThe operator's perspective (e.g., trolley right)
  2. BThe signalperson's perspective
  3. CThe rigger's perspective
  4. DTrue compass directions only
Show answer

Answer: A. The operator's perspective (e.g., trolley right). The signalperson shall ensure all directions are given to the operator from the operator's perspective (e.g., trolley right).

Below the Hook (B30.20)

15. How many device chapters does ASME B30.20 contain, and which devices do they cover?

  1. ASix: structural/mechanical lifters, vacuum lifters, close proximity magnets, remote magnets, grapples, and clamps
  2. BFour: lifting beams, magnets, vacuum lifters, and clamps
  3. CFive: spreader beams, magnets, vacuum lifters, grapples, and tongs
  4. DThree: mechanical lifters, magnetic lifters, and vacuum lifters
Show answer

Answer: A. Six: structural/mechanical lifters, vacuum lifters, close proximity magnets, remote magnets, grapples, and clamps. B30.20 has Chapters 20-1 Structural and Mechanical Lifting Devices, 20-2 Vacuum Lifting Devices, 20-3 Close Proximity Operated Lifting Magnets, 20-4 Remotely Operated Lifting Magnets, 20-5 Scrap and Material-Handling Grapples, and 20-6 Clamps.

Overhead Crane

16. Runway girders should be sized to deflect no more than what fraction of their span under a loaded crane?

  1. A1/800
  2. B1/100
  3. C1/50
  4. D1/2000
Show answer

Answer: A. 1/800. Runway girders should deflect not more than 1/800 of their span under a loaded crane with the trolley at the near end.

ASME B30.2 Standard

17. According to ASME B30.2, what is the standard hand signal for EMERGENCY STOP?

  1. ABoth arms extended, palms down, move arms back and forth horizontally
  2. BOne arm extended, palm down, moved back and forth
  3. CBoth fists raised overhead
  4. DOne hand clenched on top of the helmet
Show answer

Answer: A. Both arms extended, palms down, move arms back and forth horizontally. EMERGENCY STOP uses both arms extended, palms down, moving back and forth horizontally; regular STOP uses one arm extended, palm down, moved back and forth horizontally.

Below the Hook (B30.20)

18. What is the frequent inspection interval for a below-the-hook lifter in normal service?

  1. AMonthly
  2. BDaily
  3. CWeekly to monthly
  4. DQuarterly
Show answer

Answer: A. Monthly. Frequent inspection intervals are monthly for normal service, weekly to monthly for heavy service, daily to weekly for severe service, and as recommended by a qualified person for special or infrequent service.

Overhead Crane

19. Under the CMAA classifications, which service class describes a slow, often idle crane used for exact positioning of machinery in a powerhouse or reactor turbine room?

  1. AClass A1 (standby service)
  2. BClass A2 (infrequent use)
  3. CClass B (light service)
  4. DClass C (moderate service)
Show answer

Answer: A. Class A1 (standby service). Class A1 standby cranes make precise, infrequent picks and spend most of their life idle; Class A2 covers infrequent use in pump rooms and labs with several lifts a day.

ASME B30.2 Standard

20. According to ASME B30.2, what is the rule for replacement parts used in crane repairs?

  1. AThey shall be at least equal to the original manufacturer's specifications
  2. BThey may be of any commercially available grade
  3. CThey must be sourced only from the original manufacturer
  4. DThey must exceed original specifications by 25%
Show answer

Answer: A. They shall be at least equal to the original manufacturer's specifications. Maintenance personnel shall use replacement parts that are at least equal to the original manufacturer's specifications.

Study the Whole Exam, Not 20 Questions

5,000+ practice questions across Core and every specialty, load chart trainers with the rating table on screen, timed exam simulations, and the pass guarantee.

Overhead Crane Exam FAQ

Does OSHA require overhead crane certification?
OSHA 1910.179 says only designated personnel may operate an overhead crane. It does not name a specific certification, so employers decide how to qualify operators; many use CCO.
How much is CCO overhead crane certification?
CCO lists $210 for the overhead crane written exam and $70 for the practical.
Are these the real exam questions?
No. These are original practice questions on overhead crane topics.